Scorpio SR-i600 Manual de Instalação

SR-i500SW / SR-i600 FM 2-Way Security System INSTALLATION MANUAL AND USER’S GUIDE

Programming and Customizing Instructions There are two types of programming mode: 1) Programming the Transceiver- To program the transceiver the MCM

Selecting Auto/Manual Arming Enter the programming mode. Scroll to the icon and Press Button #1 to enter the arming selection screen. The LCD wi

Setting Clock Time 1. Enter the programming mode. 2. Press button #4 repeatedly until the icon begins to flash. 3. Press button #1 to select and

Optional Accessories Perimeter Sensor (SN-5) Mounting the SN-5 The Perimeter sensor uses high freq

Ignition Disable / Anti-hijack Module (RID-5) Installation 1. Cut the Ignition / Engine control wire (refer to options below) 2. Attempt to start

Back-up Battery (BAT-5) The back-up battery provides the system the ability to transmit information and activate the siren when power is interrupted

Limited Warranty Scor

Standard Features • ½ mile 2-Way FM Transceiver • LCD Water proof / impact resistant remote • Ultra low power drain MCM • Built-in accelerometer •

Installation Components List MCM (Main

Mounting the Components Select a suitable location under the seat or in a side cover. Mount the MCM using Velcro or cable ties. Make sure that it is

Connections Fuse

User’s Guide Remote Transceiver Icons and Message Displays Shock Trigger Perimeter Trigger Clock Signal Indicator Alert Type Aud/Vibr Sy

Turning the Transceiver On/Off Note: Out of the box the transceiver is turned “off” by default and should be turned “on” to operate the alarm •

Alarm Triggers When the system is triggered, the siren will sound and the turn signal lights will flash. The Transceiver’s LCD will display the fol

Motorcycle Battery Status When the voltage on the motorcycle battery drops below 11.2 volts The LCD displays icon. Locking the Transc